 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MCR106/D Silicon Controlled Rectifiers Reverse Blocking Triode Thyristors PNPN devices designed for high volume consumer applications such as temperature, light and speed control; process and remote control, and warning systems where reliability of operation is important. * * * * Glass-Passivated Surface for Reliability and Uniformity Power Rated at Economical Prices Practical Level Triggering and Holding Characteristics Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability MCR106 Series* *Motorola preferred devices except MCR106-3 SCRs 4 AMPERES RMS 60 thru 600 VOLTS G A K A G A K CASE 77-08 (TO-225AA) STYLE 2 MAXIMUM RATINGS (TJ = 25C unless otherwise noted.) Rating Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = 110C, RGK = 1 k) MCR106-2 MCR106-3 MCR106-4 MCR106-6 MCR106-8 RMS Forward Current (All Conduction Angles) Average Forward Current TC = 93C TA = 30C or Peak Non-repetitive Surge Current (1/2 Cycle, 60 Hz, TJ = -40 to +110C) Circuit Fusing Considerations (t = 8.3 ms) Peak Gate Power Average Gate Power Peak Forward Gate Current Peak Reverse Gate Voltage Operating Junction Temperature Range Symbol VDRM and VRRM Value Unit Volts 60 100 200 400 600 4 2.55 Amps Amps IT(RMS) IT(AV) ITSM I2t PGM PG(AV) IGM VRGM TJ 25 2.6 0.5 0.1 0.2 6 -40 to +110 Amps A2s Watt Watt Amp Volts C (cont.) 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Preferred devices are Motorola recommended choices for future use and best overall value. Motorola Thyristor Device Data (c) Motorola, Inc. 1995 1 MCR106 Series MAXIMUM RATINGS -- continued Rating Storage Temperature Range Mounting Torque(1) Symbol Tstg -- Value -40 to +150 6 Unit C in. lb. THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Symbol RJC RJA Max 3 75 Unit C/W C/W ELECTRICAL CHARACTERISTICS (TC = 25C and RGK = 1000 Ohms unless otherwise noted.) Characteristic Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM) TJ = 25C TJ = 110C Forward "On" Voltage (ITM = 4 A Peak) Gate Trigger Current (Continuous dc)(2) (VAK = 7 Vdc, RL = 100 Ohms) (VAK = 7 Vdc, RL = 100 Ohms, TC = -40C) Gate Trigger Voltage (Continuous dc) (VAK = 7 Vdc, RL = 100 Ohms, TC = 25C) Gate Non-Trigger Voltage (VAK = Rated VDRM, RL = 100 Ohms, TJ = 110C) Holding Current (VAK = 7 Vdc, TC = 25C) Forward Voltage Application Rate (TJ = 110C) Symbol IDRM, IRRM -- -- VTM IGT -- -- VGT VGD IH dv/dt -- 0.2 -- -- -- -- -- -- -- 10 200 500 1 -- 5 -- Volts Volts mA V/s -- -- -- -- 10 200 2 Min Typ Max Unit A A Volts A 1. Torque rating applies with use of compression washer (B52200-F006 or equivalent). Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are common. (See AN209B). For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200C. For optimum results, an activated flux (oxide removing) is recommended. 2. RGK current is not included in measurement. 2 Motorola Thyristor Device Data MCR106 Series CURRENT DERATING TC , MAXIMUM ALLOWABLE CASE TEMPERATURE ( C) FIGURE 1 - MAXIMUM CASE TEMPERATURE 110 106 102 98 94 90 = 30 86 82 0 0.4 1.2 1.6 2.0 2.4 2.8 3.2 IT(AV), AVERAGE FORWARD CURRENT (AMP) 0.8 3.6 4.0 60 90 120 180 dc 0 f = 60 Hz TA , MAXIMUM ALLOWABLE AMBIENT TEMPERATURE ( C) 110 FIGURE 2 - MAXIMUM AMBIENT TEMPERATURE 90 0 70 f = 60 Hz 50 = 30 0 0.1 30 60 90 180 dc 0.8 0.2 0.3 0.4 0.5 0.6 0.7 IT(AV), AVERAGE FORWARD CURRENT (AMP) Motorola Thyristor Device Data 3 MCR106 Series PACKAGE DIMENSIONS -B- U Q F M C -A- 123 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B C D F G H J K M Q R S U V INCHES MIN MAX 0.425 0.435 0.295 0.305 0.095 0.105 0.020 0.026 0.115 0.130 0.094 BSC 0.050 0.095 0.015 0.025 0.575 0.655 5 _ TYP 0.148 0.158 0.045 0.055 0.025 0.035 0.145 0.155 0.040 --- MILLIMETERS MIN MAX 10.80 11.04 7.50 7.74 2.42 2.66 0.51 0.66 2.93 3.30 2.39 BSC 1.27 2.41 0.39 0.63 14.61 16.63 5 _ TYP 3.76 4.01 1.15 1.39 0.64 0.88 3.69 3.93 1.02 --- H K STYLE 2: PIN 1. CATHODE 2. ANODE 3. GATE V G S D 2 PL 0.25 (0.010) M J R 0.25 (0.010) A M A M M B M B M CASE 77-08 (TO-225AA) Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 4 *MCR106/D* Motorola Thyristor Device Data MCR106/D |
Price & Availability of MCR106
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |